Saponin Modified Clay For Crude Palm Oil Bleaching

Fahrizal Ayub Kalidikalam, Patricia Grace Dei Evita Tanzil Halili, Shella P Santoso, Suryadi Ismadji

Abstract


Bleaching of crude palm oil (MGS) is a mandatory step for producing edible palm oil. Bleaching agent, known as bleaching earth, is used as the decolorization agent. Bleaching earth acts as adsorbent to adsorb carotenoid and other organic content in MGS. Bentonite is the common decolorization agent used in the bleaching process. Activation of bentonite is needed prior to enhanced the adsorptive ability. In this study, the bentonite was fabricated by using saponin surfactant to enlarge the surface area, and thus, improving the adsorption capacity of bentonite. The activation of bentonite was conducted by impregnating the bentonite particles with saponin solution at various mass ratio; specifically, bentonite to saponin ratios of 100: 1, 200: 1, 300: 1, 400: 1, and 500: 1 were applied. The impregnation, or activation, temperature of 40 and 50?C was chosen. The succeed of the saponin impregnation was characterized using a Fourier Transform Infrared (FTIR) spectroscopy analysis. The alteration of bentonite cation exchange capacity (CEC) value before and after impregnation was evaluated. The bleaching performance of the saponin modified bentonite was assessed by determining the amount of carotenoid compound removed. Furthermore, the change in free-fatty acid value of MGS (after bleaching) was also assessed. The bleaching process was carried out by mixing the bentonite into MGS at a temperature of 90?C for 10 minutes. The bleaching process result shows that the rarasaponin modified bentonite able to adsorp 310 mg of carotenoid per g of the adsorbent.

Full Text:

PDF

References


Kurniawan, A., Sutiono, H., Ju, Y. H., Soetaredjo, F. E., Ayucitra, A.,Yudha, A. dan Ismadji, S. (2010). Utilization of rarasaponin natural surfactant for organo-bentonite preparation:Application for methylene blue removal from aqueous effluent. Microporous and Mesoporous Materials 142, pages 184-193.

Tanjaya, A., Sudono., Indraswati, N., danIsmadji, S., (2010).Pembuatan Bleaching Earth dari Bentonit Pacitan dengan Aktivasi Asam : Karakterisasi dan Kemampuan Bleaching.

Tamba, D., Hasibuan, H. A., AfrianaL. (2017).Pengaruh Dosis Bleaching Earth dan Waktu Pemucatan Crude Pulm Oil yang Bervariasi Deterioration of Bleaching Index (DOBI) Terhadap Mutu Produk. Teknologi Industri Pertanian 27, hal69-75.

Humbarsono, A. Y., (2007). Lempung Serap Tanjung Harjo Sebagai Pencampur Lempung G.Pare Godean Untuk Bahan Keramik Melalui Kajian Mineralogi di Pundong Bantul Yogyakarta. Surabaya, Teknik Geologi UPN Veteran.Scientific Research Journal hal 700-708.

Ketaren, S. (2008). Minyak dan Lemak Pangan.

Zhu, L., REN, X., and Yu, S. (1998). Use of Cetyltrimethylammonium Bromide-Bentonite To Remove Organic Contaminants of Varying Polar Character from Water. Environmental Science Technology 32, page 3374-3378.

Murray, H. (2006). APPLIED CLAY MINERALOGY Occurrences, Processing and Application of Kaolins, Bentonites, PalygorskiteSepiolite, and Common Clays. Elsevier,pages 188.

Myers, D. (2006). Surfactant Science And Technology. Wiley Interscience, pages 220-245.

Naibaho, P. M. (1996). Teknologi Pengolahan Kelapa Sawit. Pusat Penelitian Kelapa Sawit, Medan.

James, O. O.,Mesubi, M. A.,Adekola, F. A.,Odebunmi, E. O.,Adekeye J. I. D. and Bale,R. B. (2008). Bleaching performance of a nigerian (Yola) bentonite. Latin American AppliedResearch, pages 327-093.

Krisnandi, Y. K., Sihombing, R. Dan Sunu M. O. (2013). Bentonit Alam Tapanuli Diinterkalasi Surfaktan Kationik Benzil Trimetilammonium Klorida (BTMA-CI).

Prasetiowati, Y., danKoestiari, T. (2014). Kapasitas Adsorpsi Bentonit Teknis Sebagai Adsorben Ion Cd2+. UNESA Journal of Chemistry 3, hal 3.




DOI: https://doi.org/10.33508/wt.v19i1.2321



Creative Commons License
Widya Teknik is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License